The Right Stuff® Grey Instant 90 Minute Gasket Maker - 5oz
Quickly outperforms pre-cut gaskets by providing superior adhesion to rigid joints that experience high torque loads. A premium professional grade gasket maker for today’s fast-paced professional garage and heavy DIY’ers. Temperature range -65°F to 500°F Intermittent.
Look for other Permatex The Right Stuff® branded Gasket Makers that return vehicles to service in a matter of minutes.
Directions:
- For best results, surfaces should be clean and dry.
- Cut nozzle and apply a continuous 1/16″ to 1/4″ (2 to 6mm) bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange.
- Let dry for one hour then tighten to torque specifications.
- Allow 90 minutes before filling with fluids or returning to service.
- Replace cap after use.
NOTE: Not recommended for use on head gaskets or parts in contact with gasoline.